atcomsystems.ca/forum
Posted By: SSPhone Adtran 924 programming help - 04/29/19 05:40 PM
Any Adtran gurus available to help me setup a couple of 924's one is a Gen 2 other a Gen 3. I'm trying to convert SIP to PRI.
Posted By: SSPhone Re: Adtran 924 programming help - 07/17/19 01:40 AM
UPDATE
I finally got the 924 provisioned and had it on an external static IP. It was hacked in less than 2 hours. Note to self "Change ADMIN PASSWORD " from default
Posted By: Professor Shadow Re: Adtran 924 programming help - 07/17/19 02:27 AM
I changed mine from default to *******
Posted By: Daniel Re: Adtran 924 programming help - 07/17/19 04:32 PM
or you could use ***********, or my personal favorite ***********************************************
Posted By: Professor Shadow Re: Adtran 924 programming help - 07/17/19 05:01 PM
Originally Posted by Daniel
or you could use ***********, or my personal favorite ***********************************************
Ohhhhh, a combination of Hexadecimal and Reverse Base64...I like it!
Posted By: ffej010 Re: Adtran 924 programming help - 07/20/19 07:46 PM
Do you have an SBC in front of the 924 or are you running the SBC firmware in the 924? I'd be leery of just putting that on the open Internet.
Posted By: telecom guy10 Re: Adtran 924 programming help - 02/06/20 06:02 PM
Here is a guide from Adtran on doing this exact process. It will need some tweaking to meet your specific install.

https://supportforums.adtran.com/docs/DOC-3404

Posted By: telecom guy10 Re: Adtran 924 programming help - 02/06/20 06:03 PM
Sorry, just realized this thread is old. Regardless, the Adtran links I posted above will be helpful to anyone in the future.
Posted By: Silversam Re: Adtran 924 programming help - 02/08/20 07:24 PM
Thanks for the helpful tips!

Late or not they're always welcome.

Sam
© Sundance Phone System Forums - VOIP & Cloud Phone Help