anyone know how to program executech 824
need to add co lines to sets

From Station #10 -With handset hung up dial intercom * 746 * , dial station you want to program, dial 7 , press line key 1-8 then press 1-8 on dial pad for line you want to appear on that line key,repeat for each line.Use 9 to disable key and light for unused line button's.Press * monitor to end programming.Hope this helps
Good Luck

[This message has been edited by dtmf (edited 03-22-2001).]

Which Executech System are you trying to Program. There are some older ones that program differently than DTMF has discribed.

I am trying to replace a 6706 with a 6700 speakerphone. How do I program the phone lines into the 6700 to go to the buttons I want? It is picking up the same configuration as the 6706 bot our 3rd line is "lost" on the 6700

Welcome to the forums tc4. However you're gonna get almost zero response tagging on to an 11 year old post. Probably get more support by hitting the New Topic icon....