atcomsystems.ca/forum
Posted By: Anonymous 2232 - 03/22/01 12:11 PM
How about programming line buttons on this bigger system? Station 110 has the DSS console. Station 121 needs line button programming. Anyone?
Posted By: dtmf Re: 2232 - 03/22/01 02:48 PM
Better get a pen and paper for this! [Linked Image from sundance-communications.com]
At station 110 enter intercom*746* ,Press dss button 41(Dss buttons count same as tel extesion on Dss), dial station you want to program, press dss button 39 , press button you want to program and now press A or B button for the line you want appear on it.
Press * monitor to end programming

Buttons A and B equal lines are as follows

Bottom of phone
B4=L4 B5=L5 B6=L6 B7=L7 B8=L8
Hold B1=L1 B2=L2 B3=L3 Intercom

Top of phone
A1=L21 A8=L22
A2=L19 A9=L20
A3=L17 A10=L18
A4=L15 A11=L16
A5=L13 A12=L14
A6=L11 A13=L12
A7=L9 A14=L10

Told ya you would need a pen and paper. [Linked Image from sundance-communications.com]

Good luck


[This message has been edited by dtmf (edited 03-22-2001).]
© Sundance Phone System Forums - VOIP & Cloud Phone Help