I need to know how to program the speed dial feature for a G1632/ Impact 61632

Any help would be greatly appreciated

Thanks in advance!

teletech
Station speed dialing - dial intercom **2 then dial (0-9)for storage,choose line to be used (0=last line used,or 1-4 for line groups)dial number, use hold for pause if needed, Speaker to end.
To use when on hook dial (0-9)that you stored it on
Off hook hit HOLD then (0-9)
If it's for system speed dialing let us know
because it's a little more involved.
Hope this helps
dtmf

That does help. But I'm afraid I do need to program the system speed dial as well. Can you help?

teletech
Programs as follows
Intercom*#746*
1.Dial 02
2.Dial 01-99 for storage location
3.Dial # to clear current entry
4.Dial 01-24 for line port or 90 for last line used or 91-94 for line group
5.Dial number to be stored, use HOLD for a pause or TAP for hookflash if needed
6.Press TRAN/CONF to save
7.Repeat steps 2-6 for more numbers or press SPKR to end
Hope this helps
dtmf

OOOPS
forgot to tell ya to program from station 10

Thaks!
You're the greatest!

teltech
>>You're the greatest!<<

Please, his head is going to pop.

[This message has been edited by test-ok (edited 04-20-2001).]

HEY! Leave teletech alone

[This message has been edited by dtmf (edited 04-20-2001).]