I believe I have 5x20 Key sets only on my 1432b system and need programming overlays.
The overlays I have fit a key set with a 22 btn. field above the dial pad. Can this be shifted to match my 20 btn. field or can you map out the programming keys of my key set.
What are the model numbers of the phones you have? It should be a 4 digit number followed by a letter, followed by a 2 letter color code, i.e. 6620S-PG.
[This message has been edited by paul144 (edited February 18, 2004).]
Depends on what phone you are programming with as to what keys you use.Your going to need a Console also.
[This message has been edited by dtmf (edited February 18, 2004).]
Stupid me! I forgot that you need a dss to program those. OOPS!
I don't remember if the old 1432B had VDT ability, I tend to think it didn't, but I could be wrong. I need to upgrade my memory chips.
mark
serial port built in the amp connector, you just punch down to it. Use VDT, Laptop or modem.
yes, you use the SMDR port on J4 pair 39 thru 46