atcomsystems.ca/forum
Posted By: mmarcus Executech (original) - 05/29/04 10:13 PM
I'm familiar with programming my executech 616k tan cabinet system. However I forgot how to set-up a simply (if there is such a thing on an executech) deny table.

All I want to do is deny international calls on all lines (1-6) and all phones ie. prefix 011

So if anyone can help, how do I set up the deny table and how do I select it.
Posted By: jwooten Re: Executech (original) - 05/30/04 05:25 AM
The early executech models did not have allow/deny tables like the newer XE series. You could only restrict 0xxx or 1xxx.
From ext-10 enter I*746*
Press 4 (toll restrict)
Press line key
Do these two steps for each line
Press * to finish monitor to end.
Now the stations. Enter I*746*
dial station number
Press 0 (toll restrict 0xx dialing)
Press * to finish monitor to end
Repeat for each station.
This should restrict 011 dialing
Posted By: dtmf Re: Executech (original) - 05/30/04 09:55 AM
I'm sorry JW but I have to disagree, you can set up toll tables on the 616-616B-816. They have both Deny and Allow tables. You would use Memory Buttons 1-8 for the tables and Memory Buttons 9-12 for the Entry. Key Pad [2] for Allow and [3] for Deny

The 308 and 824 only had 0 and 1 Toll restriction.
Posted By: jwooten Re: Executech (original) - 05/30/04 12:33 PM
It was the 824 I took the info from!
Posted By: dtmf Re: Executech (original) - 05/30/04 01:01 PM
I hear ya JW, for some reason they didn't give Toll Tables to that system, That's Comdial for ya. Why on earth would they give it to the others and not that one is beyond me. Anybody could have made the same mistake. After all it was like 15 years ago [Linked Image from sundance-communications.com]
Posted By: mmarcus Re: Executech (original) - 05/30/04 05:09 PM
Ok so to deny "01" what is the simplest way for me to do it. by the way I tried the above but part II did not work.
Thanks
Posted By: jwooten Re: Executech (original) - 05/31/04 05:44 AM
You are right about not working. The procedure I gave you was incorrect. Try this one from the 0616X,0816X manual.
Enter base level program as before.
Press the A1 button for toll table 1. (top left)
Press 3 for deny
Press A9 button. (second button from top right)
Dial 011
Press * and monitor to end
Enter base level (restriction to lines)
Press line key for the first line
Press the first line key to restrict
Press A1 for restriction
Press second line key to restrict
Press A1 for restriction
Repeat this procedure until all lines are done.
Press * and monitor to end.
Enter base level program (restriction to stations)
Dial first station to program.
Press A1 for restrriction
Press *
Dial second station
Press A1 for restriction
Press *
Repeat these last 2 steps until all stations are assigned.
Press * and monitor to end.
© Sundance Phone System Forums - VOIP & Cloud Phone Help