atcomsystems.ca/forum
Posted By: martin3 Modem Programing - 08/03/04 01:28 PM
Ok I have another question for you guys, how do you use the PCDA for remote programing? The unit has the modem card at ext 199. I load the program and hit F9 for modem but it says no modem or not turned on. I am using a lap top that has an internal modem that works fine.
Posted By: Mark K. Re: Modem Programing - 08/03/04 01:56 PM
First you have to dial in to the system and be transferred to 199. Then you hit f9.
Default baud is 2400.
mark
Posted By: jwooten Re: Modem Programing - 08/03/04 04:31 PM
The PCDBA program for the 80 only supports com1 or 2. Your internal modem is probably com3 or 4.
© Sundance Phone System Forums - VOIP & Cloud Phone Help