atcomsystems.ca/forum
Posted By: nah DXP Plus External Modem 195 w\ VMMI - 06/20/07 08:43 AM
I have a couple DXP Plus systems with software version 195 loaded. When I connect an external modem and dial in, I can connect with hyperterminal but not VMMI. Does anyone know of some magical fix?
Posted By: jwooten Re: DXP Plus External Modem 195 w\ VMMI - 06/20/07 09:14 AM
This may be an issue with your TAPI drivers or lack of same. Tech tip dxp000071 addresses this issue.
Posted By: nah Re: DXP Plus External Modem 195 w\ VMMI - 06/20/07 10:12 AM
Thanks for the reply.
My modems work well with VMMI on all systems except DXP/Plus with new software.
Posted By: BIGDOG3c Re: DXP Plus External Modem 195 w\ VMMI - 06/20/07 03:08 PM
I have found that you need to set the com port on the vmmi to match your modem com port. even though its for direct connection. When I did that my modem issues went away. good luck.
Posted By: nah Re: DXP Plus External Modem 195 w\ VMMI - 06/22/07 12:08 PM
You are the man BIGDOG.....I had the comm port correct but not the modem's baud rate. I changed that and I get in every time.

Thank you
© Sundance Phone System Forums - VOIP & Cloud Phone Help