Is there a way I can output the SMDR logs to more than destination? I know only serial port will output the logs, but I need those logs to send to two places. I wasn't sure if there was a device I could use that could take the raw data and accomplisg that for me...
TIA!
That's not what I think will work, but thanks for giving me the idea!
I think I actually need a hardware solution over the software one:
https://www.cdw.com/shop/products/default.aspx?EDC=510199 Thanks again!
Use only the send and ground leads from the Comdial and use only recieve and ground on your printer/PC. Do not use any flow control. Unless your devices draw too much current on those leads it should work.