atcomsystems.ca/forum
Posted By: 4lford cant autoprogram ext numbers - 10/16/08 07:18 AM
Hello i have a comdial impressions 2022s phones i need to reprogram the speedial buttons w/new ext numbers only 1 button would let me all the otheres say invalid entry...


Thanks for ur help
Posted By: Mark K. Re: cant autoprogram ext numbers - 10/16/08 08:10 AM
The buttons must first be mapped as "blank" buttons in the system programming.
Posted By: 4lford Re: cant autoprogram ext numbers - 10/16/08 08:30 AM
Any ideas how i do that?
Posted By: 4lford Re: cant autoprogram ext numbers - 10/16/08 08:39 AM
my manual tell me to blank a button dial 56 then 04. when i do that it does nothing?
Posted By: RATHER BE FISHING Re: cant autoprogram ext numbers - 10/16/08 09:33 AM
You are in programming mode aren't you?
Posted By: 4lford Re: cant autoprogram ext numbers - 10/16/08 09:58 AM
yea.. however following the manual, it tells me to press all the lines i want to blank after i do that then it wont let me go any farther
Posted By: Mark K. Re: cant autoprogram ext numbers - 10/16/08 02:21 PM
you're not reading the instructions correctly, there are more steps then you described. You're on the right page, carefully re-read all the instructions, you need to press # (I Think) then enter the extensions on which you want to have the buttons blanked.
Mark
Posted By: Hopalong Re: cant autoprogram ext numbers - 10/19/08 05:15 AM
Mark has it right select the buttons you want blanked then # then enter the port numbers (not extension numbers) you want to blank.
© Sundance Phone System Forums - VOIP & Cloud Phone Help