atcomsystems.ca/forum
Posted By: bditech FXII - 12/08/08 09:05 AM
Well this is what I'm stuck on. Want to add ports to Station Hunt group 250 I pull it up but wont let me program the new ports in. Can you program the new ports in Station Hunt group or do I need to go someplace else to do the new ports. When pull up that hunt group it shows the ports in it but are a light color and when clicked on it wont let me in. So I asume its in another program the ports in there now are COS 32 and so are the new ports.
Thank You for your help. :confused: :shrug:
Posted By: RATHER BE FISHING Re: FXII - 12/08/08 09:39 AM
You must disable the hunt group first by changing the search type. You can then add or delete.
Posted By: bditech Re: FXII - 12/08/08 02:21 PM
Thank you I played with it and found out that changing changing serarch type as you have said Ring all to none then you can add or remove ports.
Thank You
For your reply
© Sundance Phone System Forums - VOIP & Cloud Phone Help