We're trying program delayed ring of a particular line on a particular phone. We get all the way through it, hit S to save and we get a "console 44 not programmed" on one and on another station we get "console 7 not programmed".

Can't find an explanation of the error.

Any help would be appreciated.

Thanks

Is this a DID/PRI or regular loop start trunk?

Just loop pots lines.
We were able to program appearance on the necessary phones and save that programming. Our next step was to setup the delayed ring on 3 other phones that we had programmed the appearance of CO 7. Each one gave us a diff error when we hit "y" to save, one was "console 7 not programmed". Looked thru the entire manual and could not find any reference to that error.

Other programming worked, just can't save the delayed ring entry.
The phones on which we are trying to program delayed ring for CO 7, already have 2 trunks set up for delayed ring , just can't add another entry and save it.

Is it possible the CO ports are set to aux?