Trying to replace a DX - 80 8 port 160 hour hard drive based voicemail with the DX 80 4-port, 64mb version. The previous voicemail was defective. The CF voicemail is not version 2.

I installed the board, and did a cold restart. The board beeps once on power up, power LED is steady, and the drive LED starts random flashes after about 30 seconds. About 30 seconds later, I hear six or eight low-volume beeps, almost immediately followed by 4 regular volume beeps.

When I call group 433, it is ring no answer. When I try the individual extensions, 157 through 160, I get a busy tone.

Any ideas on how to get this to come up? Or is it possible I have a version problem? I did not have my CF card reader with me, so I'm going to check that tonight to make sure it has the software on it.

Check your PMs.

Did you get an answer of how to get in the voice mail if didn't know the pass word?

It doesn't matter what I try to do I can't get in to it. Does anyone know how to get in it?

How are you trying to get in? Software program on a PC or admin through a phone?