I am in need of some advice I installed an expansion cabinet with a 8SDLI card and am not able to assign numbers to the new extensions MMC 806 does not appear to have any affect all stations can place intercom calls and access co lines. What is the procedure for adding these new stations?

TIA
Don

OK so you did an mmc 806 and did it for the specific card slot right?After this,you must go into mmc 724 and assign extension numbers to the ports of the card.The system only assigns extension numbers on an initial power up from default after that you must assign the numbers to any extension or trunk cards you add.Let me know if you need more help.