atcomsystems.ca/forum
Posted By: KML Cid on dcs prostar - 04/07/05 03:02 PM
we have a dcs prostar system with a misc-2 card and behind it i can see four chips with cid on them
we just had CID (caller id ) activated on our co lines

but when i try any programing with the cid i get the not permited mesage
Posted By: pvj Re: Cid on dcs prostar - 04/07/05 04:23 PM
You need to set it up using technician level programming
Transfer 800
passcode
Posted By: KML Re: Cid on dcs prostar - 04/07/05 05:06 PM
The installer conveniently forgot to give us that password

Is there any way to reset that password?
Posted By: CMDL_GUY Re: Cid on dcs prostar - 04/07/05 07:11 PM
This area of programming is for telephone technicians. You need to get your installing company to program at this level. There is nothing in your profile that tells me you are a telephone tech.
Posted By: KML Re: Cid on dcs prostar - 04/08/05 08:36 AM
Sorry i blamed the installer

I looked threw my papers and found the 800 code
cid is working but now i need new phones with more buttons to use all the options
Posted By: CMDL_GUY Re: Cid on dcs prostar - 04/08/05 01:15 PM
you can e-mail me with what you need in the way of phones I am Samsung dealer. If you are looking for used phones you should check this website before buying from me.
© Sundance Phone System Forums - VOIP & Cloud Phone Help