I am trying to test LIM and WIM cards on OS 7200
the problem that I changed the Data server IP and forget the new one.
How can I goback to the default one or know what it is now?
There is a way to defualt the WIM using the SIO port which I won't post here for security reasons. Though with that said, did you change all of the IP's on the WIM? The reason I ask is the WIM comes with 4 ports on it's face that can be used for LAN/WAN. If you changed just one of them you could change your laptop to the config. of one of the other ports and log in that way. The other default IP addresses of the other ports are in the manual.
what I did is:-
1)I Installed the WIM and LIM cards
2)I connect My labtop to one of the LIM Card and I Give it a 10.0.0.100/24 Fixed IP.
Using web I get into the Configuration and change the Data server IP from 10.0.0.1 to something else I can not Remember
I do not Think I change another thing
can any one help me please?!?!
Instead of connecting to the first ethernet port (which by default is 10.0.0.1) connect to the second or third port. Port 2 is 10.0.1.1 and 3 is 10.0.2.1. If you have not changed those, then you should be able to connect to them.
what!
Port 2 where?on The LIM Card?
are you sure?
dear benb;
what are the IP addresses of the other ports rather than LAN...I can not found them on the
OS7200 Dataserver userGuide