Hi, Im trying to link to systems a OS500 and a Panasonic TD200.
Im trying with the trunks 8401, but I can´t. Actually I tried with a OS500 and OS100 if I use the 8301 SPNET everything works fine, but when I try to use the H.323 trunk 8401 I can´t.
I can see the numers I dial (in the SMDR from the transmiter) but in the reciver side I can not see anything.
any idea??
thanks
I´m trying to make a call between a OS100 and OS500. If I use SPNet
using 830X trunks everything works good, but if I try with H323 using
trunks 840X I can´t.
This are the settings.
OS500
MMC724
N-LCR : 22
MMC820
SELF: Link ID 090 IP 192.168.0.200
SYS01: Link ID 091 IP 192.168.0.151 (for the test, I have both in the
same LAN)
MMC824
01: 22 - 0912 SZ: 04 MAX: 07
MMC830
IP 192.168.0.200
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY
MMC831
IP 192.168.0.201
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY
MMC603
GROUP 803 MEM 8301-8308
GROUP 804 MEM 8401-8408
MMC710
091 LENGTH:06 RT:02
MMC712
RT:02 G:804
I think that´s all. Here if I dial 2201 take any 840x trunk, if I see
the SMDR I can see 091201, but in the other side I don´t recive anything.
The other side has this settings
OS100
MMC724
N-LCR : 32
MMC820
SELF: Link ID 091 IP 192.168.0.151
SYS01: Link ID 090 IP 192.168.0.200
MMC824
01: 32 - 0902 SZ: 04 MAX: 07
MMC830
IP 192.168.0.151
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY
MMC831
IP 192.168.0.152
MASK 255.255.255.0
GW 192.168.0.1
PRIVATE IP ONLY
MMC603
GROUP 803 MEM 8301-8308
GROUP 804 MEM 8401-8408
MMC710
091 LENGTH:06 RT:02
MMC712
RT:02 G:804
Here if I dial 3201 take any 840x trunk, if I see the SMDR I can see
091201, but in the other side I don´t recive anything.
If in the MMC712 I change the group 804 and use 803, the call connect
fine.
Is there anything I am missing?
I wonder if you can help me.
Thanks
Regards