atcomsystems.ca/forum
Posted By: RM SYSTEMS Caller ID stops working on 100's and 616's - 10/13/11 04:43 AM
I've got a few customers where CID will stop working and system needs to be reset to get it going again. anyone seen this?
Posted By: aestes1 Re: Caller ID stops working on 100's and 616's - 10/13/11 06:50 AM
I ran in to the same problem on a 7030 yesterday.
Not sure what is causing it, however a reboot will usually take care of it.
Posted By: nameless Re: Caller ID stops working on 100's and 616's - 10/13/11 05:25 PM
I've seen something similar on a OS100 but the incorrect caller id gets displayed, this was with 2.72 firmware.

I assume this is PSTN?
Posted By: Biztel Cuban Okie Tech Re: Caller ID stops working on 100's and 616's - 10/28/11 02:41 PM
Could possibly be bad MISC cards.
Posted By: VIBob Re: Caller ID stops working on 100's and 616's - 11/01/11 11:12 AM
From what I recall, these systems have some buffer that gets full and doesn't flush. Samsung was aware of the issue but did not ever get around to fixing. Reboot clears the buffer out and its good until it gets full again.
© Sundance Business VOIP Telephone Help