Hi all

i hv huge pbx's network , all pbx's in the network is connecting using Q sig .

In this network i installed OS7200 sucessfully, & it's work using Qsig normally with two pri cards (two Qsig nodes)

The OS700 installed in the center of the network

The mapping of network is:

Node A on OS7200 (801): Is connected to single alcteal pbx have NODE ID 837

Node B on 7200 (802): Is connected to Head Quarter of company (the ID 's of nodes that conected to HQ is (80,81,702,704,605,609,..)

The customer want,any employee in OS7200 Left handset
& dial( 837 xxx) the call must route to node A

& any employee in OS7200 Left handset
& dial( 80 xxx,81 xxx,702 xxx,704 xxx,605 xxx,609 xxx) the call must route to node B

My problem the customer does not want to dial any access code before NODE ID (my friends you know to employ this configuration i need to apply LCR) .
So how i can activate the LCR without dialing any code?or if u hv any idea to solve this case ?

regards

Download the OS500 manual book and right at the end you will find how to employ network LCR without dialling access codes. Your whole network becomes one huge PABX, make sure the xtn nmbering does not match in any of the nodes, at H/Q MMC820
e.g. node 801 2200-2499
n node 802 2500-2799
node 837 3200-3599
mmc724 N/WORK LCR 1=25
2=35
IN mmc824 you match the NLCR digit to the node ID of the associated PABX xtn numbering SIZE=4 MAX=06.
In mmc710 your node ID is matched to the associated Qsig trks i.e. PRI
YOU do this at all the different nodes and activate LCR, then there would be no need to dial node numbers first.
Better still let me furnish you with my details, you buy me a plane ticket and I'll be there in a jiffy to sort it all out!!!!!!!

Thanks tatenda

But all nodes have the same nmbering plane (201,202,203,.....), THE MAIN difference BETWEEN NODES JUST,(Note that the pbxs at another nodes are NORTEL,alctel) ,in Node ID .

So how i can do that?My friends

Please any help

Why dont you change modes so there all in the same range then you could then us lcr to route the calls

Mr.Gerrya

What do you mean "change modes" ?

My friends

Please any help

My friends

Please any help

i still wait your suggestions to solve my problem

Sent pm

I Sent it

I get it

thks