Installing new os7200s. installed tepria card in slot 3. the card is installed, can be seen in 724, trunk lines 7009-7032, can physical dial each trunk number, and receive, so called dial tone. system will not allow me to put these trunks into 603, in any group.( 9, 800,etc.) gives me error:
800(P:453)0x42 mismatch group member type.
any thoughts, can't cut system over till resolved.

thanks

Do you have other trunks in the system. Go to 603, choose a new group and change type to isdn , then put your pri trunk members.Good luck.

Are you using osdm? If so do it using key set.