Have tried to send files to system via IT Tool. Program show that they have been transferred but they do not write.
Have restarted system but have not defaulted.
Any ideas before I do a manual wipe?
If you're trying to upgrade to 4.6, you need to use Device Manager- IT won't work with the newest upgrade.
Is this a single or 2 cab system?
7030 is the tiny baby cabinet, couldn't be a two cabinet system.
Somewhat off-topic from the original question, but it could - you fit OPM cards to each cab and link them together, this gives you a system only slightly less capable than a 7100.
It is a 1 cab system with only 5 ext's.
However after looking through all options
1) default
2) hit with hammer
3) pour water on it
I eventually went with option 4 - Recover using hyperterm & tftp server. Went back to 4.30 then up to 4.60
All looks good, apart from all the VM reprogramming I now have to do at the DM/IT Tool would not let me back up the VM files.