atcomsystems.ca/forum
Posted By: Kaiser UNI Card goes to sleep - 05/25/13 06:45 PM
I have a UNI card on a new v4.65 that seems to keep going to sleep. It has a digital card, analog card and CO card on it. All the lights go orange and the phones go blank.

The alarm log is empty and if I do a card reset in software it doesn't do anything. It says it's running.

A reboot brings it back online for a week or so but then it goes to sleep again.

Whaddya think, before I call tech support? Bad UNI card?
Posted By: Biztel Cuban Okie Tech Re: UNI Card goes to sleep - 06/04/13 11:59 PM
Could be a bad UNI Card or a bad slot in the cabinet. Have you tried it in a different slot? Have you tried changing out the DLI or another module card with a new one? They could be causing a short if possible.
Posted By: CyberLaw Re: UNI Card goes to sleep - 01/09/21 08:38 PM
Very likely a power supply issue. Since this post was 8 years ago... that power supply would have failed by now.
© Sundance Phone System Forums - VOIP & Cloud Phone Help