OfficeServ SoHo sit200emrb 2 line phone trunk access - 06/20/14 10:02 PM
Hi,
I'm trying to set this system up using two trunk (PSTN) lines - everything works fine, except I want some handsets to be able to choose, or at least be preset to, either one trunk or the other..
So, the base station I want to be mainly dialling out on trunk 2, but to be able to select trunk one occasionally, I want one of the WIP5000 handsets to do the same, and the rest of the WIP5000 handsets to always dial out on trunk 1.
If I then add VOIP later, I want users to be able to choose whether they dial out on PSTN or VOIP.
How do I do this? The manual is next to useless, and I can't find any help on the web.
For info, the system is running firmware 1.03 - I can't seem to find any firmware updates online either.
Thanks in advance.
Rob
I'm trying to set this system up using two trunk (PSTN) lines - everything works fine, except I want some handsets to be able to choose, or at least be preset to, either one trunk or the other..
So, the base station I want to be mainly dialling out on trunk 2, but to be able to select trunk one occasionally, I want one of the WIP5000 handsets to do the same, and the rest of the WIP5000 handsets to always dial out on trunk 1.
If I then add VOIP later, I want users to be able to choose whether they dial out on PSTN or VOIP.
How do I do this? The manual is next to useless, and I can't find any help on the web.
For info, the system is running firmware 1.03 - I can't seem to find any firmware updates online either.
Thanks in advance.
Rob