atcomsystems.ca/forum
Posted By: Bushmills ghost message - 03/14/16 08:07 PM
Hi folks, looking for a bit of translation help here.

I have a customer that has now gotten a few ghost messages. It looks like one station (202) is sending a message to the other (208) but it is in the middle of the night when nobody is in the office.

Here is the applicable bit from the log:

4) [MOD 02 Night] New call - Wed Mar 2 1:18:30 2016
CP 1:18.30.69 4) Collecting out of band data
4) [MOD 02 Night] CODE = CID = <202> FID = <208> TRUNK = <>
4) [MOD 02 Night] Searching on Call Code - NS
4) [MNU Forward Station]
4) [MNU Forward Station] Searching on Forwarding party ID - 208
CP 1:18.30.75 4) Key set to <208>
CP 1:18.30.79 4) External circuit detected
4) [EXT 01 CATHY] No answer
4) [EXT 01 CATHY] Caller made no request
CP 1:18.45.46 4) NO-ENTRY translated to MESSAGE
4) [MBX 01 CATHY] Recording message
CP 1:29.32.41 4) No response from caller
CP 1:29.32.41 4) Recording complete
4) [MBX 01 CATHY] Message 00000749 delivered to [MBX 01 CATHY]
4) [MBX 01 CATHY] Caller disconnected
4) VM hanging up


Can anyone help me suss out what's going on here?


Thanks in advance,

-WIll
Posted By: Genesiscomm Re: ghost message - 03/14/16 11:50 PM
Bad phone, not uncommon. I see it a lot with 8 button idcs phones for some reason. Also in bad refurb or repaired phones.
Posted By: Bushmills Re: ghost message - 03/17/16 05:09 PM
Thanks brother!
© Sundance Phone System Forums - VOIP & Cloud Phone Help