Hello

When setting up remote programming with a SMV20I do i need to send 6001 and 6002 to the SVM20I or the MP40/20 IP address?

Thanks in advance.

Send 6001 to the processor IP and in system options 2.1.5 and disable SVM option IP service. That works for me

Send 6001 and 21 to the svmi20i ip address.

turn on private with public for both MP40 and SVMi20i and enter the site's public ip address.

Then remote programming of the vm and access to the logs will work fine.

I do this all the time.

No need to disable the svmi ip service

Thanks