I have a problem setting up Mobex functionality over SPnet. Primary system is OS500 v2.76 connected over SPnet to OS7100 v4.46d. OS7100 has no outside lines.

Since OS500 does not support Mobex I wanted to create a Mobex extension on OS7100 and send the call trough OS500, but it's not working.

I also have problems to overflow the call from OS500 to OS7100.

Has anyone done this?

Mobex is not supported over SPNET.

You may be able to get it working with SIP trunks.

Call overflow works however

Hi
If you have a unified number plan just put the group number on the OS500 in "next port" and set an overflow time. Note this will not overflow i.e. continue to ring on the OS7100 and OS500 its more like a group transfer.