Needs to configure OS7400 for LCR as below:

Two Samsung OS7200 are connected via SPnet.
PABX No.1 Ext no dial plan 2001......2099
PABX No2. Ext No. plan 9201......9299

Extension no. of other Samsung pabx (connected via SPNet) which dial plan start from 9201-9299

1-----If we dial 9201 its working ok.
2-----If we dial 2001 its working ok.
2-----If dial local no. (within city) which start from 343xxxxx working ok.
3----- Issue comes if we dial Cell no which start from 0300xxxxxx [/color] NOT WORKING it show invalid Number

LCR is on
operator code is ''0''

any help possible

In the lcr routing digits add an entry of digit = 0 length = xx rt = x. That will tell the system that any number starting with 0 will be a phone call and route it through the appropriate route. The length would be however many digits the system should look for before dialing.