atcomsystems.ca/forum
my current card the sd card has v.95 on it. would like to use the files or sd card with v5.03 on it to upgrade the current card in the cabinet. how would i go about doing that?

taking certain files from the v 5.03 and overwrite certain files of the v4.95 sd card?

just switch out the sd cards altogether?


here are list of files from the v5.03 card

thank you in advance

Attached picture 5.03.png
Either will work, copy the new files over to the existing sd card or swap the sd card. Depends what you are trying to accomplish but if you swap the sd cards then your vmail messages and settings will be whatever is on the other sd card.
ok then copying the files would be better then. i know 5.03 has the licenses opened up and want to setup voip remote stations at our site.
You don't need 5.03 unless you are going to use SIP phones. As you already have SMT phone licenses.
in the future planning on setting up some remote extensions. i'm assuming sip is the only option to do so unless there is another way to setup a remote voip phone. I read that the MGI-16 card can do sip and do not need a license would that be a work around?
The MGI card is just a media gateway. All it does is allow the audio to be converted from one format to the other. If you are needing to use the SIP channels, then you must either buy the licenses or upgrade the software to 5.03 as nameless stated. The licenses allow for you to have the SIP extensions or the actual SIP trunks to be used. This has nothing to do with the MGI channels.
© Sundance Phone System Forums - VOIP & Cloud Phone Help