can any one help me with this setup so far as the wire is done.

I have the Music On Hold with Paging Module

dont know what the wiring post go to what

T , R , 1 , 2 , M1, M 2

Thanks for your help

t/t are for paging audio, 1/2 are for the paging relay, and m1/m2 are for the music on hold

Does the polarity mater here?

T\R go in amp input

M1\M2 go to the Audio Source output

What does the Paging Relay do?

Thanks for the Help TTech





[This message has been edited by Sportmens (edited April 23, 2005).]

The page relay would be like a contact for muting backgound music if applicable. Polarity should not matter.Hook it up if it doesn't sound good then reverse the wires.

FYI you don't even need the module for MOH or Page, just wire wrap to pins on backboard!!
206,410,820.

learning something new every day!

If my memory serves pins 9&13 were the music input when you don't use the module.

Hi This is the first time someone is talking about music on hold please can someone help me I have a music on hold company in south africa and really need a unit because of the lack of suppliers in this country can anyone help me