I was wondering if anyone can recommend a surface mount housing for 4 strands of fiber. The strands will be terminated on Corning unicam type connectors. I am trying to avoid installing a large wall mount enclosure for just 4 strands. Thanks in advance!

Mike

Check with Leviton....they have a Quik Port four port unit that you can get snap-in modules for fiber.

Have you looked at these
https://www.hubbellcatalog.com/hubbellpremise/datasheet.asp?PN=AMO&FAM=SurfaceHousings
I hope that this link works
Hubbell AMO

Ortronics also has many solutions for fiber.

Try this

https://www.legrand.us/Ortronics/Copper/Copper-Workstation/Multimedia/Series-II/OR-62100040.aspx

With one of these

https://www.legrand.us/Ortronics/Fiber/Fiber-Workstation/Multimedia/Fib-or-Cop-II/OR-62100048.aspx