atcomsystems.ca/forum
Posted By: Yoda Panduit Terminations - 09/03/14 06:18 PM
I have an upcoming job that specifies Panduit cat 6 jacks. I've looked at these jacks but never used them (I'm a Leviton guy) and I'm wondering if using the EGJT termination tool is the proper tool. Or should I get a Panduit head for my Jack Rapid tool?

Also, on the patch panel end, they've spec'd a DPKR48688TG panel. This includes the jacks, I believe, and is not an empty panel. How are the cables terminated on the panel? Are the panel jacks different than the CJ688TG jack at the wall plate in some way? Or do they actually come out of the panel for terminating?

Thanks!
Jim
Posted By: jeffmoss26 Re: Panduit Terminations - 09/03/14 06:38 PM
EJGT is the correct tool for those jacks.
The panel is just a 110 punchdown.
Posted By: Yoda Re: Panduit Terminations - 09/03/14 07:11 PM
Thanks Jeff. Got it on order.
Posted By: jeffmoss26 Re: Panduit Terminations - 09/03/14 08:09 PM
We use Panduit here, a mix of the 3 different style jack terminations so I have all the tools.
© Sundance Phone System Forums - VOIP & Cloud Phone Help