I"m looking for some surface mount plastic raceway to dress up a horizontal run of 50 pair UG cable. Something like this.

It's all inside. About 15' long. Any other suggestions?

Thanks.
Jim

What's the matter with that?

-Hal

That's probably what I'll use, Hal. Just open to suggestions.

The largest I can find in Panduit is model LD10. But I have an old scrap that measures more than the LD10. I wonder if they used to make an LD15?

Why not a some conduit? EMT would probably look better.

Oobie- Agreed, but the cable is already in and terminated. Not going to take it apart to slide conduit on. Just trying to dress things up.

You can go to their T-70 (base and cover) that's roughly 4"x1-3/4". Wiremold has their NM2000 Series that's 1-3/4"x 1". Thing is trying to get somebody to sell you one length.

-Hal

Gotch well that makes sense!!

Remember to use screws and anchors on that stuff. The adhesive is good for about a year, then the raceway is left hanging by the wires.

The adhesive is good for holding it in place while you drill the holes and install the screws and anchors.

-Hal

I hate plastic raceway with a passion. It always looks bad to me no matter how you install it.

I do like WireMolds 2400 series of metal raceway.

Wiremold 2400 Series Raceway @ Graybar