I am trying to get the DSS keys on a YeaLink to work on our ESI 200 phone system. Do we know the values to features like voicemail and transfer? I have not had any luck with programming it so far, and can't find anything online.
Regards,
Check SLT user guide and you should be able to get most codes from it.
@oobie have you tried it with the SIP STN on the Com servers? do you know if it will work? I'm going to look up SLT user guide right now, any specific one you can recommend?
No I never used a SIP Stn on a Comm server it was to big of a headache when I could get 48 Key IP phone up and running in seconds and it was fully funtional.
@oobie I'm trying to get a wireless solution to work. and the Yealink t48S is wireless capable. I have docs for setting up SIP STN if you would like it, it is specifically for polycoms, but should work. Also, there is a doc for the 900 that i will post.
Hi all,
So I just got an update from ESI,
They stated that "While SIP communications typically uses * codes for different operations... I do not think it supports that on the CommServer. It simply registers the station and then supports Analog functionality, which basically means you have to use Flash for transfers and there is a process for holds and such" but how do I flash on a Yealink? that is the next question.
The best solution is to purchase and install an ESI wireless III phone. It has programmable keys.
Rcaman
@Rcaman they want a desk phone, that is the problem, but don't want to wire the place, and take the wiring out once the move locations next year. CEO will be at the new satellite location.