atcomsystems.ca/forum
Posted By: maine phone man ESI -50 - 01/31/18 01:17 PM
Hello got this system moved up from Florida to NH has 7 digital phones 3 IP phones , I can wire up the digital phones ok question is what is needed to get those IP phones going , they shipped the whole phone board to site except looks like a switch or router is missing where the cat5e to ESI network port is missing. also looks line there phone lines were hosted by a Florida company using line 5,6,7,8 because on phone board nothing was wired to co 1 2 3 4

thanks
Posted By: nonameyet Re: ESI -50 - 01/31/18 06:29 PM
the Network port ...that is a dual purpose , it can be used for programming and where the IP phones " connect to " sort of.
if nothing was wired to lines 1,2,3,4, it probably has a PRI card in it.
You really need to Connect to it to see what is really there. The IP phones require Licenses in the system
Posted By: maine phone man Re: ESI -50 - 01/31/18 10:45 PM
yes there lines 5,6,7,8,9 were set up as pri at new location in NH they had 4 analog lines installed and I installed and programmed them to 6 digital phones works great, here's the situation 1 guy is left in Florida at a home office with a IP phone that he used , system disconnected and now in NH 2 additional IP phones in NH for users
question is how do you make the IP phones work . I see that Florida phone systems took out there network equipment also can run a report and see ext 140 141 142 had ip addresss looking to get the IP set up back on line
Posted By: upstateny Re: ESI -50 - 02/01/18 11:52 AM
Originally Posted by maine phone man
yes there lines 5,6,7,8,9 were set up as pri at new location in NH they had 4 analog lines installed and I installed and programmed them to 6 digital phones works great, here's the situation 1 guy is left in Florida at a home office with a IP phone that he used , system disconnected and now in NH 2 additional IP phones in NH for users
question is how do you make the IP phones work . I see that Florida phone systems took out there network equipment also can run a report and see ext 140 141 142 had ip addresss looking to get the IP set up back on line

At the very least you need to update the programming with the new public IP address. You may possibly need to set up port forwarding on the router / firewall as well.
Posted By: maine phone man Re: ESI -50 - 02/01/18 01:49 PM
thanks that public IP from the new Comcast modem gets programming into the esi 50 ?
all so all thats on site is the comcast modem they dont have a router or fire wall in new hamshire
Posted By: nonameyet Re: ESI -50 - 02/01/18 03:07 PM
so, does the customer have a static IP ? , you will need 2 internal static IP address you will need a port fwd set up on port 59002 ( TCP) for the NSP, and port fwd set up on 59001 for the IVC ( internal card) UDP
this is the port the IP talk on do you know what software the phone system is running?
Posted By: maine phone man Re: ESI -50 - 02/01/18 03:47 PM
thanks Brian I don't know the SW level this system was up and running in Florida now in NH only real difference is a new internet carrier Comcast
Posted By: maine phone man Re: ESI -50 - 02/03/18 03:22 PM
update to this install system is up and running 4 line analog lines 1,2,3,4 6 48 button digital phones

comcast modem for internet plugged into 16 port net gear switch Esi 50 plugged into a spare switch port

2 48 Ip phones plugged into switch boot up and find ESI system work fine.

only thing not working is the 1 48 button remote ip phone in a florida home office wont find the system
says lost com link reconnecting. . I did update to new IP address into the ESI system any help
on the remote phone not finding this ESI_50 server
Posted By: upstateny Re: ESI -50 - 02/04/18 03:27 PM
Originally Posted by maine phone man
update to this install system is up and running 4 line analog lines 1,2,3,4 6 48 button digital phones

comcast modem for internet plugged into 16 port net gear switch Esi 50 plugged into a spare switch port

2 48 Ip phones plugged into switch boot up and find ESI system work fine.

only thing not working is the 1 48 button remote ip phone in a florida home office wont find the system
says lost com link reconnecting. . I did update to new IP address into the ESI system any help
on the remote phone not finding this ESI_50 server

The phone needs to be reprogrammed as well so it knows the new IP address and can go find it. There is software or they can mail the phone back and plug it in locally then send it back to Florida .... or deliver it yourself!
Posted By: Professor Shadow Re: ESI -50 - 02/04/18 05:10 PM
Originally Posted by upstateny
...send it back to Florida .... or deliver it yourself!
ROAD TRIP!
Posted By: maine phone man Re: ESI -50 - 02/05/18 04:15 PM
Hi I did take IP phone that is working in NH home for weekend and tried on my internet connection it couldn't find the ESI server . com link lost reconnecting . are you saying plug in and go into ESI programming and reprogram remote address?
Posted By: upstateny Re: ESI -50 - 02/05/18 04:42 PM
Originally Posted by maine phone man
Hi I did take IP phone that is working in NH home for weekend and tried on my internet connection it couldn't find the ESI server . com link lost reconnecting . are you saying plug in and go into ESI programming and reprogram remote address?

If a remote phone was working it should work fine at another location.

As far as the one in Florida that isn't working it needs the new public IP address of the system programmed into it. The new 60 key phone allows you to program it with the buttons on the phone. The older 48 key phone needs to be programmed via software from a pc or if it is connected locally to the KSU it will get the new programming.
Posted By: maine phone man Re: ESI -50 - 02/05/18 05:24 PM
no the working ip phone onsite in NH works onsite network but when I tried it at my home it wouldnt find the ESI server
Posted By: upstateny Re: ESI -50 - 02/05/18 09:23 PM
Originally Posted by maine phone man
no the working ip phone onsite in NH works onsite network but when I tried it at my home it wouldnt find the ESI server

Was the port forwarding setup on the router / firewall?
Posted By: maine phone man Re: ESI -50 - 02/06/18 12:03 AM
ok here what is programmed in ESI
Base IP:192.168.1.251
subnet mask:255.255.255.0
base UDP port: 59000
gateway
Posted By: maine phone man Re: ESI -50 - 02/06/18 12:40 AM

ok here what is programmed in ESI when in florida
PBX base IP
Base IP:192.168.1.251
subnet mask:255.255.255.0
base UDP port: 59000
gateway IP: 192.168.1.1
public IP 64.238.161.225
dhcp:disabled

IVC Information:
Mac:00:30:4d:F5:B8:A6
local IP 192.168.1.251
gateway 192.168.1.1
public IP 64.238.161.225
subnet 255.255.255.0
UDP 59101
vlan 1
Qos disable
mask yes
network services processor
NSP Mac 00:30:4d:f5:B8:A7
Nsp Mode NSP-0
Vsp private IP 192.168.1.250
nsp sub 255.255.255.0
Nsp Public IP 64.238.161.225

my remote phone in florida is 192.168.2.100 udp 59203 ext 143

my New hampshire comcast modem external ip 73.68.18.227 I entered in above in public ip address
my internal ip are 10.1.10.1

im thinking the 192.168.1.251 are ip from the router in Florida and need to change to match the comcast modem

your thoughts

Dan
Posted By: upstateny Re: ESI -50 - 02/06/18 01:33 PM
Originally Posted by maine phone man
ok here what is programmed in ESI when in florida
PBX base IP
Base IP:192.168.1.251
subnet mask:255.255.255.0
base UDP port: 59000
gateway IP: 192.168.1.1
public IP 64.238.161.225
dhcp:disabled

IVC Information:
Mac:00:30:4d:F5:B8:A6
local IP 192.168.1.251
gateway 192.168.1.1
public IP 64.238.161.225
subnet 255.255.255.0
UDP 59101
vlan 1
Qos disable
mask yes
network services processor
NSP Mac 00:30:4d:f5:B8:A7
Nsp Mode NSP-0
Vsp private IP 192.168.1.250
nsp sub 255.255.255.0
Nsp Public IP 64.238.161.225

my remote phone in florida is 192.168.2.100 udp 59203 ext 143

my New hampshire comcast modem external ip 73.68.18.227 I entered in above in public ip address
my internal ip are 10.1.10.1

im thinking the 192.168.1.251 are ip from the router in Florida and need to change to match the comcast modem

your thoughts

Dan

Quite frankly my thoughts are you need to hire someone who knows routing and ip addressing and ESI phones to get this to work. But basically the IVC Card needs to be on the same network as the other equipment behind the firewall at HQ. The remote phone needs to be on the same network as the equipment behind the modem / router (either via DHCP or manually setting the address) on the remote side and the firewall at HQ needs to have port forwarding set up to forward traffic from the public IP to the private IP of the system. Once all of the programming is correct on the KSU you can then plug the remote phones in locally and they receive the correct programming or you can use the software to program them at the remote site.

I'm not trying to be a jerk by any means but this stuff requires training from ESI and some networking knowledge.
Posted By: nonameyet Re: ESI -50 - 02/06/18 06:52 PM
so, i just ran a port query on your new IP...it appears as though you haven't opened up port 59002 TCP ?

as I had said before, you will also need to open up ( port 59101 ( we usually change ours to 59001) on UDP

IP address resolved to c-73-68-18-227.hsd1.nh.comcast.net

querying...

TCP port 59002 (unknown service): FILTERED ( This should say " LISTENING " ) But, you may have it locked down to the outside world ?

Posted By: maine phone man Re: ESI -50 - 02/06/18 08:39 PM
PM Brian
Posted By: nonameyet Re: ESI -50 - 02/13/18 08:41 PM
Maine Phone Man is all good now.
Posted By: Professor Shadow Re: ESI -50 - 02/14/18 03:24 AM
Originally Posted by nonameyet
Maine Phone Man is all good now.
thumbsup Good job, Sir!
© Sundance Phone System Forums - VOIP & Cloud Phone Help