For outside line dial tone, can i have line 4 not to pick when i lift the handset., that line is another business.
thanks Gary S.

put it in a different line access group. then take away access to phones you dont want to use

Yes i did put line 4 in another line group (8) i could not find how to allow All phones access to group 8 to press the line button or dial 8 and still have line 1 to 3 on outside dial tone when you pick up the hand set. system go in tomorrow.thanks.
Gary S.

If you don't want anyone to use line 4 for outgoing calls, mark it as incoming only.

Or-

If you want anyone to be able to use it for outgoing calls as a last resort, make it line 1 and tell the system to choose lines from line 4 up.

System went in very smooth, except i could not dial tone on the phones. Tech support said to initialize and reprogram.
So i did, reprogram,co okay. Now the screen on x 100 says day 2, i wanted day only ?
Thanks Gary s.

By default, extension 100 has a button for changing from Day to Night, Day 2, Night 2 and Auto. Keep pressing that button- usually top left-until it displays the mode you want to be in.

I thought about that after i left the site, and thank you
Gary S