atcomsystems.ca/forum
Posted By: Iwatsu Guru Omega Voice EVMC - 02/22/18 03:27 PM
I'm having trouble connecting to the LAN port on the card using the VMI editor software on any PC running Win7.
WinXP machines are not having this issue. I made all necessary firewall exceptions and tried running in WinXP compatibility mode with no luck.
has anyone else run across this issue ?
thanks
Posted By: JBean3329 Re: Omega Voice EVMC - 02/22/18 11:52 PM
Never had a problem, but try using a cross-over cable. Some NIC cards aren't auto-sensing.
Posted By: PhoneGuyMD Re: Omega Voice EVMC - 03/07/18 04:37 PM
We had a very similar problem at our office where 1 pc could connect but all others would not. Per ICON it is a PC problem and here are the steps to fix it...

Computer Management -> Device Manager -> Network adapters -> then select properties of the installed adapter -> advanced tab

"UDP Checksum Offload (IPV4)" Set the value = "Disabled" and click "OK".

If you can't change it on the NIC, you will need to google the Windows registry change to fix it or use a serial connection.
Posted By: Iwatsu Guru Re: Omega Voice EVMC - 03/09/18 03:16 PM
thanks RegisMT that did the trick !
© Sundance Phone System Forums - VOIP & Cloud Phone Help