atcomsystems.ca/forum
Posted By: Jonathan IDS 108 - 01/03/05 11:32 AM
Hey guys, I have an appointment tomorrow with someone that has an IDS 108. They want to know if they should buy a new system, or if the 108 is still able to be supported with new parts. I can only find refurbished parts. Can someone give me some info on the age, tendencies, etc. of this system. Is it time for an upgrade?? [Linked Image from sundance-communications.com]
Posted By: paul144 Re: IDS 108 - 01/03/05 01:08 PM
OK, short story:
The IDS is no longer manufactured or supported by a manufacturer. It ceased to have new parts manufactured for it when InterTel bought Executone.
A company called Aable Communications is liscensed by Intertel to support the Executone systems. I know very little about them.
The IDS is a very good system. The only major issues that I know of are that it requires a modified Wyse 60 monitor or a PC running the correct terminal emulation to program it at all. There is no programming that can be done through a phoneset. Also, because of when it was discontinued, it does not and as far as I know will never support VOIP.

------------------
Intertel Telephone Repair
Toshiba Telephone Repair
Posted By: Jonathan Re: IDS 108 - 01/03/05 01:24 PM
Very good info. I appreciate it Paul.

J
Posted By: paul144 Re: IDS 108 - 01/04/05 06:56 AM
[Linked Image from sundance-communications.com]

------------------
Executone Telephone Repair
Toshiba Telephone Repair

[This message has been edited by paul144 (edited January 04, 2005).]
Posted By: jjmaly Re: IDS 108 - 01/12/05 05:15 PM
Hi
I can help you with parts for this system.
I have prety much everything for it.
email me and I will reply to you and pass on the phone number.
© Sundance Business VOIP Telephone Help