Does any one know the cable pin out (p.n. 01035-1) for the Executone PRI Card to the ADC/Kentrox T-SMART CSU/DSU. The cable it self is a DB15 to DB15.
Thanks
Walt
From memory, I believe they're straight-thru using pins 1, 3, 9 & 11. Pins 2 & 10 are shield.
Mike
yes the pins are 1 3 9 11
from the telco
1 3 9 11 blue orange red green
the CSU to T1/ PRI
csu PRI
1 to 9
3 to 11
9 to 1
11 to 3
try it if it does not work, then I will get you the correct pin out
Thanks for your replys......
The "Turn up and Test" was delayed.
I will post the correct wiring configuration.
Walt