atcomsystems.ca/forum
Posted By: devildognc Executone Config Screen - 12/15/11 10:48 AM
Have a Txf listed in the config screen what type of card is it i have looked in the manual and can not find it. Thanks for the help.
Posted By: nonameyet Re: Executone Config Screen - 12/15/11 06:12 PM
How big is the system? is it a 648 ( with 3 cabinets? )

I'm trying to remember... :p
Posted By: mc601 Re: Executone Config Screen - 12/16/11 07:41 AM
Yes what type of system and software, and what is listed in the slot before that one. As we know T1s is the second (vacant) slot for a T1 card that is listed. I forget what shows if you have the T1 card set for only one slot. Will check some old configurations screens I have copies of to see if I see that listed in any of them.
Posted By: mforrence Re: Executone Config Screen - 12/16/11 12:51 PM
Txf is not a standard card. Hit ESC and F again and see if it paints the same. Also assuming you're using TVI925/950 terminal emulation. Lastly, pull card from cabinet and slide it back in to see if designation becomes clear.
Posted By: devildognc Re: Executone Config Screen - 12/22/11 10:07 AM
Thanks for all the replys sorry for the late reply back. have been out of town. problem was bad card,
Posted By: daneboy330 Re: Executone Config Screen - 12/22/11 03:17 PM
So the card goes bad and the system just comes up with an imaginary name for it?
© Sundance Business VOIP Telephone Help