atcomsystems.ca/forum
Posted By: Ablayz Executone IDS - VMS VMI options lost - 03/29/16 05:49 PM
The battery failed on one of our IDS systems. It lost its VMS and VMI options. I contacted Mitel and received a program called Secure.exe and VMI-VMS.OPT file. It didn't come with instructions. Connecting, choosing restore, hitting send and choosing the file didn't work.
I logged on with level 10 access. I'm not sure what to try next.

Thanks
Posted By: Ablayz Re: Executone IDS - VMS VMI options lost - 03/29/16 05:51 PM
It's an IDS 108, Eclipse 2.5.0
Posted By: pvj Re: Executone IDS - VMS VMI options lost - 03/29/16 11:08 PM
Not sure never seen that file before.Can you send me the file so I can take a look?
Posted By: Ablayz Re: Executone IDS - VMS VMI options lost - 03/30/16 12:31 PM
That file is a 16 bit EXE. I had to run it in a VM running Win XP.
Posted By: pvj Re: Executone IDS - VMS VMI options lost - 03/30/16 08:03 PM
not sure exactly what they sent you.There is a modem initialization file.I'll have to try it on an older windows version
Posted By: pvj Re: Executone IDS - VMS VMI options lost - 03/31/16 02:24 PM
Loaded it up on an older PC running XP and ran it in a command prompt.It does load up.I have to wonder if it is meant to be loaded through a modem?That's how I would think that Executone /Mitel would have done it. There are a couple of guys on the board here who may be able to help you out.Look up jjmaly
Posted By: nonameyet Re: Executone IDS - VMS VMI options lost - 04/02/16 07:05 PM
all you have to do is Restore the VMI-VMS.OPT file. don't even need level 10...
© Sundance Business VOIP Telephone Help