atcomsystems.ca/forum
Posted By: Craig A. Ahrens ACD queue key - 02/17/17 09:55 PM
Is there a way to make the Queue key (831 key) ring?
Posted By: nonameyet Re: ACD queue key - 02/18/17 05:05 PM
You do know what the key is for? Log in to the Queue...Phone Rings...
Posted By: Craig A. Ahrens Re: ACD queue key - 02/20/17 02:47 PM
Well the 831 key is not a log-in key. The log-in key is an 822 key. The Queue key is an indicator key that lights or flashes based on the number of calls in Queue. If the key is set with the proper sub-code it allows a non-logged in agent to answer calls from that Queue. My question is...can the key be set to ring also?
Posted By: nonameyet Re: ACD queue key - 02/20/17 07:16 PM
my bad, it's been awhile...but, I don't think you can make it ring...
Posted By: Craig A. Ahrens Re: ACD queue key - 03/01/17 10:15 PM
OH Ya know what? I was using the ACD Conditional Queue Alert feature. I recorded a message in a recorder that said "Call In Queue" and it would page specific phones and play the recording.
Posted By: nonameyet Re: ACD queue key - 03/03/17 03:58 PM
well, There You go !
Posted By: mc601 Re: ACD queue key - 03/22/17 04:55 PM
You would have to use the page feature as mentioned above.
And to answer the ACD queue key is programmed with a 1+ACD group
102 = group 2

The queue key can be used if it is ringing on another agents phone you have to turn on that in the options.

Pick Up Ringing ACD Call
When an ACD call has been assigned to an agent and begins ringing the agent’s telephone,
the call cannot be answered with an ACD QUEUE key or by dialing 4 7 and the 2–digit
ACD group number. This is how the system operates when the option is programmed N (no).
When the option is programmed Y (yes), calls ringing on agents’ telephones can be answered
with an ACD QUEUE key or by dialing 4 7 and the 2–digit ACD group number. This
option defaults to N.

Don't know it that will help.?
© Sundance Phone System Forums - VOIP & Cloud Phone Help