atcomsystems.ca/forum
Posted By: teldata1 Distance between Poles - 04/01/22 12:02 PM
I was on a job doing a site survey for a new fiber installation that Verizon is going to be doing

I was just there for the short piece of inner duct that needs to be installed once in the building

I was working with the Verizon (Contractor) and he was showing me what needs to be done

at the time I didn't really think of it but I did notice that from the Telephone pole to the building seemed more than 100 feet away

I thought that the poles were about 100 feet away from each other


just curious

Thanks

JD
Posted By: Silversam Re: Distance between Poles - 04/04/22 02:53 PM
I think it can be longer than 100 feet.

Unfortunately, i no longer remember for sure and no longer have the manuals to look it up.

I'll try to find out...

Sam
Posted By: Ruben Re: Distance between Poles - 04/04/22 03:41 PM
Try this
https://www.ofsoptics.com/wp-content/uploads/IP-003.pdf
Posted By: justbill Re: Distance between Poles - 04/04/22 07:24 PM
Brother, I sure don't remember, but thinking for communications cable only 150ft and 200ft for Non transmission power, stuff through towns and rural service lines.
Posted By: Mercenary Roadie Re: Distance between Poles - 04/04/22 11:50 PM
You can find many of the old Bell System Practices here.
http://bellsystempractices.org/
© Sundance Business VOIP Telephone Help