Anybody have a set of prints for an AE 880 speakerphone? I know I used to have them, but for the life of me I can't find them.
Sam
Would the 882A prints work for you ?
The AE 880 is single line (speaker model)
Correct ?
TJ -
Correct - A single line speakerphone. I don't know the 882. When we needed a multi line model we put a 6040 key strip on with the 880.
Sam
Sam
If you Google " 880 speakerphone " go to TCI library, and it will give you a set of prints.
Thanks! I'll go there now.
Sam
Can anyone give me some help what the different models and variations of the 880 are and how you tell the difference? I thought there were only two models, a rotary and TT model. There are not a lot of numbers on the bottom of my 880.
Two post above no help me. Is there something besides an 880 or 882A? I mean is there a 881? Do all 88x have an A and B model? What is the difference. BTW, I looked at the plans on TCI and it looks as if half of them are cut off. Does anyone else notice this too?
The two drawings are the left and right halves of the same print. Put them together and Voila!
Sam
Sam, that makes me believe that TCI has just used the designations 880A and 880B as a means to name their schematic, not the phones. I still wonder if anyone has any definitive information on this somewhat unusual speakerphone.
The print is for a rotary model. We used to put them in years ago - but mostly the tone dial models. They were a full duplex speakerphone and worked like a charm.
They incorporated the electronics into a panel phone that we used to put in Hospital ORs (with an On/Off foot switch).
Sam
So again I beg the question - is there really only one model 880 in rotary and TT? Or are there other subsequent models such as an 882 which I have really never seen anything about?
I don't know. There was a time I could have found out, but those days are long gone.
Maybe someone else knows.
Sam
According to the gte practices the 881a [single line]and 882a [9 or 15 line set]used a set very similar to the we 830 series.The b versions were a redesign using large scale integrated cicuits.
I am not familiar with the WE 830. Where could I find a picture of one?