I am installing 18/2 paging wire for 7 paging zones. These paging circuits will terminate in an IDF and then will be extended with one 18/2 to the amplifier in the MDF. I'm looking for a splice or screw terminal for my splice in the IDF.

Any suggestions?

I found one that will work.

As long as you found one, great!

We use barrier strips or sometimes if time is of the essence, just a 5" electrical box with a cover and chase nipples. Wire nuts inside. Zones 1,2,3 together. 4,5,6 together. 7,8 together. Jump each group out to the feed back to the amp. Tag each group,

Sam

Thanks Sam. I found the IDEAL 89-610 barrier strips.