1A2/U-Verse - 07/07/09 05:54 AM
Hey all -
I thought I'd start another thread rather than continuing to hijack Jeff's: Jeff\'s thread
AT&T isn't here yet, but I noticed the router indicated the lines were provisioned. Checked for dial tone out of it, checked OK. So then I called my POTS lines - 1A2 and SLT's function just fine, and the 1A2 even releases any lines on hold if the caller hangs up.
Just thought I'd throw this out there in case any other 1A2'ers are in a similar situation.
PS:
As noted in Jeff's thread, and as per Ed's comments - you'll need 400E line cards or later.
Thanks much -
Matt
I thought I'd start another thread rather than continuing to hijack Jeff's: Jeff\'s thread
AT&T isn't here yet, but I noticed the router indicated the lines were provisioned. Checked for dial tone out of it, checked OK. So then I called my POTS lines - 1A2 and SLT's function just fine, and the 1A2 even releases any lines on hold if the caller hangs up.
Just thought I'd throw this out there in case any other 1A2'ers are in a similar situation.
PS:
As noted in Jeff's thread, and as per Ed's comments - you'll need 400E line cards or later.
Thanks much -
Matt