atcomsystems.ca/forum
Posted By: efrench515 FlexCom 400 IP trunk to Cisco CME - 02/16/07 10:08 AM
I have a customer with a FlexCom 400 it has both an UGW and IPG. We are installing a Callmanager Express at one of their locations and I would like to establish either a SIP or H323 trunk between the Tadiran and the Cisco. I can handle the Cisco configuration does anyone know the Tadiran configuration or can you point me to somewhere?

Thanks
Posted By: Coral Tech Re: FlexCom 400 IP trunk to Cisco CME - 02/17/07 06:44 PM
Tadiran will need a PUGW and version 15 to do sip.
Posted By: efrench515 Re: FlexCom 400 IP trunk to Cisco CME - 02/19/07 04:06 AM
What if I do h323 instead? I would actually prefer h323 as Cisco fully impliments h323 but only has limited support for SIP
Posted By: Coral Tech Re: FlexCom 400 IP trunk to Cisco CME - 02/19/07 05:15 AM
No..323 is not supported. You might want to look into using QSIG off the Coral on a BRI or BRI card. There are extensive white papers on this on the Cisco wesite.
Posted By: Coral Tech Re: FlexCom 400 IP trunk to Cisco CME - 02/19/07 05:15 AM
No..323 is not supported. You might want to look into using QSIG off the Coral on a BRI or BRI card. There are extensive white papers on this on the Cisco wesite.
© Sundance Business VOIP Telephone Help