atcomsystems.ca/forum
AXXESS ver 5.2- 6.05. I want to modem into sites for programming. I receive Data Link TAPI error 80000048. I can connect with app via direct cable no problem. I disabled Windows Fax/scan, made certain telephony services running, tried both 9 pin serial and usb to serial converter. Same TAPI error everywhere. Thoughts, guidance? Thanx
I have never seen that error personally but it sounds like it has more to do with the modem on your laptop than with the Session Manager software.

Can you use the modem to dial into anything else? Maybe you can try to initiate a call via Hyperterminal or the like, even if it's just to your own cell phone for testing.
The WIN 7 OS cannot see the modem. Here is a link to a microsoft forum. https://social.technet.microsoft.co...2f7a7532/windows-7-a-at-modem-error-633. I had this problem using a USB modem and had to get the latest driver, then go into Windows and mess with the COM ports. Yes it is a hassle but I finally got it. This is the model I currently use: https://www.wintecind.com/features/FileMate/Networking/hardmodem.html. Make sure you are only using COM ports 1-4.
© Sundance Phone System Forums - VOIP & Cloud Phone Help