Hello. I have an ATM switch, connected to 3 cabinets (5 cabinets in total). I have a CPS and VPU. Version 9.0 We are replacing our core switches for our network this weekend. I know the IP addresses for the CPS and VPU, but not the ATM switch. Is there an easy way to figure that out. I know you can connect via the serial connection, terminal session, but didn't know if that was safe to do without defaulting something. Any help is appreciated.

Thanks.

Never mind, got a call back from the vendor. Figured it out. Thanks.

you should not have to mess with the atm switch
the default address is 192.168.200.200 if I remember correctly - you should be able to web to it from the cps then look for the external ip
but in reality - the marconi does not connect to the core network for anything