atcomsystems.ca/forum
Posted By: OLD TECH how does a star application work - 10/29/09 06:02 PM
I worked at a site today, that was programmed by me from the sheet from the engineer. they wanted to make a program change to main star application. per the engineer the star looks at the star programming for each call that comes into the application. but that the time and application order has to be in the correct order. or the call my go to the wrong route. to change how the star is programmed wasn't a big deal. but i would like to know more on the star programming.

Could someone give a 101 class on it please,

thanks

mike
Posted By: DND ON Re: how does a star application work - 10/30/09 04:29 AM
The STAR application will look at day/date/time criteria listed in the table, and will route the call when it finds a match. They’re the easiest thing in the world to program, but also the easiest to mess up.

The application will start looking for a match at table entry 1, and then if no match is found, move down the table until entry 20. As soon as a match is found, the call is routed. If there is no match, the call will route to the default application at the bottom of the table.

A common use for STAR is holiday closings. You would create a table entry for each holiday. Enter the Start and Stop date, and change Specific Date to yes. Enter your holiday application number, and you’re done. Notice that the application number was entered last. If you enter the application first, calls will immediately route to your holiday application! This is because, by default, specific date and time is set to NO, and as long as it’s a weekday, the table has found a match.

Say you want to close at noon on New Year’s Eve and be closed all day New Years. You would need to create two table entries – one for noon until midnight on 12/31 and a second one for all day 1/1.

If you use a STAR for your normal Monday through Friday routing, a good trick is to use an entry way down the table, maybe 17 or 18. This will allow you to enter holidays and special dates higher on the table. You can’t enter them below your normal routing, because the call will be routed as soon as it finds a match.
Posted By: mjahangir Re: how does a star application work - 12/02/09 07:27 AM
must commend DNDON that was a very lucid description of STAR
© Sundance Business VOIP Telephone Help