atcomsystems.ca/forum
Posted By: dunphy Partner system with 12 btn Lucent Phones - 04/11/01 01:46 PM
I am trying to integrate some 12 btn phones on a partner system with 18 btn phones. Without an overlay I can not find some line positions to have these lines show up on these phones. Is there an overlay? Is there a way to program lines? I have 7 lines, and it only shows 5 on the 12 btn units, but with a 18 btn unit it shows all 7.
Posted By: dtmf Re: Partner system with 12 btn Lucent Phones - 04/11/01 03:57 PM
dunphy
What kind of phone are you programming with , and do you have a manual? If so you can find a picture of the overlays in the manual. Then go to Line Assignments.If you don't have a manual e-mail me and I'll help you get it going.
dtmf
Posted By: Anonymous Re: Partner system with 12 btn Lucent Phones - 04/24/01 09:05 PM
You might need to clear some of those buttons with lights on the 12 button sets. Go to feature button programming at each set.
© Sundance Phone System Forums - VOIP & Cloud Phone Help